P2.5 outdoor is the only fine-pitch member of our outdoor SMD series: with a 2.5 mm pixel pitch, ≥4200 cd/m² brightness and an optimal viewing distance of ≥2.5 metres, it is made for shopfronts and street-level windows where passers-by come right up to the wall. The ≥60 fps frame rate and ≥7680 Hz refresh rate give perfectly smooth video, with 4,398 billion displayable colours. The module's service life is ≥100,000 hours, brightness degradation over 3 years is at most 15 per cent, and in its ingress-protected build it stays stable across a 10–90 per cent humidity range. This is the highest-resolution piece in our open-air range and the one that can be viewed from closest up.
LED module P2.5 outdoor – SMD
Most outdoor LED walls are made with a pixel pitch above 4 mm, because viewers typically see the picture from several metres away, from a road or a square — but there are situations where the audience stands almost in front of the wall: a shopfront along the pavement, the entrance to an underpass, a shop window on a shopping street. The P2.5 outdoor module is made for that situation, and with its 2.5 mm pixel pitch and image quality that is already enjoyable from 2.5 metres it is the finest pitch in our outdoor range. The technology here is SMD (1R1G1B), where the LED chip and the driver IC sit on one board — the proven, robust solution of the outdoor industry, with ≥4200 cd/m² brightness that stays clearly visible in direct sunlight. The 10–90 per cent relative humidity range and the service life of at least 100,000 hours guarantee that it will withstand the weather — rain, damp, temperature swings — while brightness degradation of at most 15 per cent within 3 years means the wall stays evenly bright for years.
Send me the detailed quote
We will email you a technical proposal tailored to your project: sizing, recommended pixel pitch, power consumption, an itemised price and the installation steps. If you also upload a photo of the site, we will create a free visualisation from it.
Technical specifications
This model is built to order, so it has no list price — request a quote and we will price it exactly to your dimensions.
Outdoor, but designed for close viewing
One of the most common buyer's mistakes in designing outdoor LED walls is installing a large-pitch module optimised for distance in a place where passers-by come within arm's reach of the wall — at which point the large, coarse pixel grid is distractingly visible. The P2.5 outdoor module is made for exactly this situation: with a 2.5 mm pixel pitch and a resolution of 160,000 pixels/m² it gives a sharp, continuous picture from an optimal viewing distance of just 2.5 metres. That makes it ideal for shopfronts, where the wall is placed beside the entrance or above the window and customers all but stop in front of it before stepping into the shop.
What SMD technology means outdoors
The P2.5 outdoor module is made with SMD (Surface-Mounted Device) technology, where every LED is a surface-mounted chip in a 1R1G1B configuration, with the driver electronics on the same board. This is the outdoor LED industry's most widespread solution, proven over decades, and in our build it delivers ≥4200 cd/m² brightness — which means the content stays readable and does not wash out in direct sunlight, in the glare of midday. The brightness uniformity of ≥0.95 guarantees that there are no visibly brighter or paler patches across the panel surface, and the 14–16 bit greyscale allows 4,398 billion displayable colours — which matters both for video content and for accurate reproduction of brand colours.
Weather resistance and service life for a four-season climate
The module works reliably across a 10–90 per cent relative humidity range, covering the wet, damp and freezing periods of all four seasons. The rated service life of the LED chips is at least 100,000 operating hours, and brightness degradation over 3 years of continuous operation is at most 15 per cent — which means the wall still shines at almost its original brightness for years after the warranty period has expired. The ≥60 fps frame rate and the ≥7680 Hz refresh rate ensure that video content — an advertising spot, a brand animation — runs perfectly smoothly and without stuttering, with good results when photographed or filmed on a phone too.
Consents and operation outdoors
Before installing an outdoor LED wall that is also visible from public space, it is worth clarifying the question of a townscape notification and a public-space use permit — we help through that process, from the site survey to compiling the necessary documentation, so you do not have to find your way through the official maze alone. The module's maximum consumption is ≤648 W/m², and a single module's consumption is ≤33 W, which gives a transparent basis for calculating the daily running cost. Installation, commissioning and training are carried out by our own team, and with a Warranty+ package spare parts also come from a local store rather than from a shipment abroad with weeks of waiting.
Typical applications
LED module P2.5 outdoor – SMD — frequently asked questions
Why is this the finest pitch in the outdoor range?
P2.5 outdoor is made for an optimal viewing distance of ≥2.5 metres, which is why we recommend it for places where passers-by come close to the wall — a shopfront or above a shop window, for instance. It is the piece in our open-air series designed for the closest viewing.
Does it stand up to rain and winter?
Yes — the module works reliably across a 10–90 per cent relative humidity range, and brightness degradation over 3 years of continuous operation is at most 15 per cent, which guarantees durable operation in a four-season climate.
Is consent needed because it is visible from public space?
For an outdoor wall also visible from public space, a townscape notification or a public-space use permit may be required — we help with that from the site survey to the documentation, so you do not have to manage the official process alone.
How much does a P2.5 outdoor wall consume?
A single module consumes at most 33 W, and maximum consumption is ≤648 W/m² — real operation with mixed content typically stays well below the peak figure, so the daily cost is easy to plan for.
Is the picture sharp enough by day, in direct sunlight?
Yes — the ≥4200 cd/m² brightness and the >0.95 brightness uniformity ensure that the content stays readable and sharp even in midday glare, without washing out in the ambient light.
