In short

An illuminated armchair shaped like a beanbag but built from rigid polyethylene: 68 × 66 cm, 62 cm high, weighing only 6 kg. For relaxed chill-out zones where a fabric cover would not survive the season. The price is shown above on this page.

Indoor and outdoor · 68 × 66 × 62 cm

LED beanbag-shaped armchair, 68 × 66 × 62 cm (B108B)

The LED beanbag armchair brings the look of relaxed, floor-level seating, but with a polyethylene body like every other piece in the range — so there is no filling, no cover, and it does not soak up water. A 68 × 66 cm footprint, 62 cm high, 6 kg. It is made for festivals, poolsides, youth events and family programmes.

€184net price, excl. VAT
All prices are net, excluding VAT. Reverse charge applies to EU businesses with a valid VAT number.
LED babzsák formájú fotel, 68 × 66 × 62 cm (B108B)
Get a finished quotation — in minutes →

Give us the size, the site and the build, and the system prepares the quotation and emails it straight away. No waiting for a colleague to get to it.

Send me the detailed quote

We will email you a technical proposal tailored to your project: sizing, recommended pixel pitch, power consumption, an itemised price and the installation steps. If you also upload a photo of the site, we will create a free visualisation from it.

Installation site *

We calculate the travel cost from this — required.

This quote is based on
LED beanbag-shaped armchair, 68 × 66 × 62 cm (B108B)
What do you make of the price above?

The quotation comes back at roughly this figure, only itemised and tailored to your size. Tell us where you stand and we will start with what actually matters to you.

Photo of the site — for the free visualisation

A phone photo of the wall or façade where the display would go is enough. Up to 3 photos; your browser resizes them automatically, you do not have to.

No obligation — the quote is free and commits you to nothing.

Technical specifications

ModelB108B
TypeIlluminated armchair, beanbag shape
Size68 × 66 × 62 cm
Weight6 kg
Battery5200 mAh lithium-ion
Lighting time6–8 hours, depending on the colour
Colours7 colours, by remote control
MaterialPolyethylene, impact-resistant, UV-resistant
Ingress protection ratingIP54
Load capacity150–200 kg
Gross priceas shown above on this page, including VAT
Net priceas shown above on this page, excluding VAT

Why a rigid-bodied beanbag is better at an event

A classic fabric-covered beanbag gets soaked through a single season, fades, and keeps a stain from every spilt drink. This model is polyethylene: IP54 water-resistant, UV-resistant and impact-resistant, so after rain you wipe it down and it is ready to use. The shape stays — it does not flatten, it never needs refilling, and every piece looks the same at the end of the season as at the start. In a hire fleet that means the furniture drops out through damage, not through use, which is far easier to plan for.

Where it belongs

62 cm high, a relaxed seating position: chill-out zone, festival, pool area, youth programme. It is not dinner furniture — that calls for a chair with a backrest, 72–80 cm in overall height. It is worth pairing with low tables of 20–46 cm so that a seated guest can reach a glass. The 20 cm low table and the 40–46 cm lounge tables in the range go well with it.

6 kg: the lightest seating piece

It can be moved with one hand, even between guests. Two people carry a set of 20 in over ten trips, realistically in twenty minutes. In the vehicle, at 68 × 66 cm, six pieces stand in one layer on a 1.7 × 3 metre floor, and at 6 kg they can also be transported in several layers if secured. The trade-off is that light weight: empty, in a strong wind, it can move, so bear that in mind on an open terrace or a rooftop.

Light, running time, cleaning

A 5200 mAh battery, 6–8 hours of light depending on the colour — enough to cover the evening part of a festival day. The seven colours switch by remote control, on every piece at once. Cleaning is with a damp cloth. At a festival the most common soiling is mud and spilt drink — both wipe off and neither soaks in. Wiping down a full set of 20 takes about half an hour, not a day.

What to pair it with in a chill-out zone

The logical table to go with it is the 20 cm high, 60 × 60 cm top in the range, or the 40–46 cm lounge tables. Four beanbags around one low table make an island of roughly 4 m², which fits into the corner of a festival tent. Mixed with the cube stools, the chill-out zone builds up in layers: the beanbag is the seat you lean back in, the 40 cm cube is the set-down surface and the occasional seat. Both weigh 5–6 kg, so the same crew carries them in over the same number of trips — the set-up time does not grow, only the look gets richer.

Typical applications

Festival chill-out zone where the furniture has to work in mud and rainEvening seating by a pool, where fabric would not surviveRelaxed seating for a youth or family programmeThe informal zone of a corporate event, with low tables

LED beanbag-shaped armchair, 68 × 66 × 62 cm (B108B) — frequently asked questions

Is this a real beanbag, with a filling?

No. The shape is that of a beanbag, but the body is polyethylene like the rest of the range: there is no filling and no cover, so it cannot get waterlogged and it does not flatten.

Why is it better at an event than a fabric-covered beanbag?

Because it is IP54 water-resistant, UV-resistant and wipeable. A fabric-covered piece gets soaked through a single season, fades, and keeps a stain from every spilt drink.

What kind of table goes with it?

Low tables of 20–46 cm, so that a seated guest can reach a glass. The 62 cm seating height is not suited to a dining table.

Can it move in the wind?

Empty, in a strong wind, yes, because it weighs only 6 kg. On an open terrace or a rooftop, put it somewhere more sheltered.

How long does it take to clean a set of 20?

About half an hour with a damp cloth. Mud and spilt drinks do not soak into the polyethylene surface.

Related articles

Related

Why we are the safe choice
  • In-house manufacturing and on-site installation
  • A licensed electrical engineer on every project
  • Warranty + service team in Hungary
  • On the market since 2014 — Kormos Ádám, villamosmérnök-oktató, 30 év tapasztalat
Opten „A” minősítés 2025Bisnode / Dun & Bradstreet „A”Minősített tanúsítvány