This P2 indoor LED video wall gives native Full HD resolution (1920×1080 px) in a 384×216 cm size, with 1000 nits of brightness and IP20 protection. In conference halls, exhibition halls and premium indoor venues it is the largest indoor LED video wall configuration that needs no scaling for a 1080p source. The recommended viewing distance is comfortable from as little as 2 metres, and the modules are built with a 100,000-hour lifespan in a front-serviceable design.
Indoor LED video wall P2 – 384×216 cm (Full HD)
The P2 384×216 cm configuration of the LED video wall is the only one that gives a native Full HD resolution of 1920×1080 px with no loss of pixels. That matters particularly for presentation and broadcast content, where detail in text and graphics is expected. The 3.84 × 2.16 metre bezel-less surface can fill the end wall of a conference room entirely, and it is a ready replacement for an LCD projector solution. The P2 pitch already gives a completely smooth, pixel-free image from a viewing distance of 2 metres, which in a meeting room, where participants sit close, is a basic requirement.
Send me the detailed quote
We will email you a technical proposal tailored to your project: sizing, recommended pixel pitch, power consumption, an itemised price and the installation steps. If you also upload a photo of the site, we will create a free visualisation from it.
Technical specifications
This model is built to order, so it has no list price — request a quote and we will price it exactly to your dimensions.
Native Full HD resolution
Why does native Full HD resolution matter?
If the native resolution of the video wall matches the resolution of the source content (1920×1080 px), no scaling is needed and the image is maximally sharp, with no pixel interpolation. That is particularly important for presentations: spreadsheets, small text and detailed graphics all become perfectly readable. The 2 mm pixel pitch gives a distortion-free, smooth surface from a viewing distance of 2 metres, which is guaranteed to be met at the dimensions of an average meeting room.
Compared with a projector
How is a LED video wall better than a projector?
The brightness of the LED video wall (1000 nits) does not depend on blacking out the room; the image stays vivid and rich in contrast in full daylight. A projector, by contrast, needs a darkened room for optimal image quality. A LED wall requires no maintenance (there is no lamp to change) and can run 24 hours a day for years, whereas a projector lamp typically needs replacing after 2,000–3,000 hours.
Quality that is not a lottery
Meeting room and broadcast use shows up immediately if the colour of the panels is uneven or the brightness diverges over time, which is why for the 384×216 cm configuration we fit only modules with quality LED chips from the same production batch. We run every panel through an acceptance test before commissioning rather than relying on the manufacturer's certificate alone. The nominal 100,000-hour lifespan corresponds to 25+ years at 8–10 hours of office use a day without significant loss of brightness, provided the calibration is carried out regularly. We work with our own service backing and spare parts held in stock; replacing a faulty module is done from the front in minutes, with no need to reach behind the wall or break into the whole surface.
Operation and payback
With average content the wall's consumption is typically a fraction of the maximum rated figure, because most presentations and video calls do not call on peak brightness; in an office setting that means the monthly cost of a larger group of monitors, in exchange for a far bigger and more striking surface. Control is over an HDMI, DisplayPort or DVI input with simple switching: if you can write an email and connect a laptop to a projector, you will handle this confidently too. Training is part of the handover, so reception or the IT team will be able to switch inputs on their own.
Typical applications
Indoor LED video wall P2 – 384×216 cm (Full HD) — frequently asked questions
Can a video conferencing system be connected to the LED video wall?
Yes. Any video conferencing system (Zoom Rooms, Microsoft Teams Rooms, Cisco Webex) can be connected over an HDMI or DisplayPort input. The wall also works excellently as a backdrop behind the participants on camera.
What support structure does a 384×216 cm LED video wall need for wall mounting?
Steel mounting rails fixed to the wall are needed, into which the modules clip. Korád-Trade provides the engineering drawing for the rails and the specification of the fixing points required, and the installation team also carries out the steelwork.
How much does the wall consume per month?
With average office content, consumption typically stays well below the rated peak; we give the precise monthly estimate after the site survey, based on the planned pattern of use.
How long will the wall last, and what is the warranty?
The nominal lifespan of the LED modules is 100,000 operating hours, corresponding to 25+ years at 8–10 hours of office use a day. We provide the usual manufacturer's warranty on that, extendable with the Warranty+ package.
Who installs it, and how long does it take?
Our own team carries out the complete installation, from the site survey through building the support structure to final commissioning; the exact duration depends on the conditions on site.
Can a pixel fault be repaired on site?
Yes. Because of the front maintenance design, the technician can replace the faulty module from the front of the wall on site, and we supply the part from stock, so there is no long wait.
