An illuminated standing table with a built-in ice bucket: a 70 × 65 cm body, 106 cm high, 16.5 kg. For champagne receptions and drinks service where there is nowhere to put a cooler. The price is shown above on this page.
LED standing table with ice bucket, 70 × 65 × 106 cm (C159)
This LED table with an ice bucket replaces two pieces of furniture at once: a cocktail table and a drinks cooler. It is 106 cm high, so it is used at standing height, with a 70 × 65 cm footprint and a weight of 16.5 kg. It belongs at champagne receptions, welcome drinks and outdoor events where the chilled drinks cannot stay behind the counter, because there is no counter.
Give us the size, the site and the build, and the system prepares the quotation and emails it straight away. No waiting for a colleague to get to it.
Send me the detailed quote
We will email you a technical proposal tailored to your project: sizing, recommended pixel pitch, power consumption, an itemised price and the installation steps. If you also upload a photo of the site, we will create a free visualisation from it.
Technical specifications
What a table with an ice bucket replaces
In a classic set-up, iced drinks need a bucket, a stand or a crate pushed under a table. Here all of that is part of the furniture: the ice sits in the body and the surface stays free as a set-down area. At a welcome drink point that means one piece serves a whole line of arriving guests. The 106 cm height is standing height, so the server does not bend down for the bottle and the guest takes the glass standing up. Several pieces can be placed in a row: on a ten-metre entrance stretch, three or four such tables give continuous service.
Light, running time, safety
A 5200 mAh battery, 6–8 hours of light depending on the colour. That covers the full length of a reception or an evening opening, and charging can be done during the day. No cable runs to it, which matters twice over here: ice, meltwater and electrical cable are not good company. The battery-powered, IP54-rated build takes that question out of the picture, and there is no trip hazard in the guest area either.
Loading and operating routine
16.5 kg empty. An important operating point: with ice and bottles in it, it becomes considerably heavier, so always transport it empty and fill it on site. Two people put two tables in with a single trip. In the vehicle, with a 70 × 65 cm footprint, six pieces stand in one layer on a 1.7 × 3 metre floor. The 106 cm height affects the load height, so loading them upright makes the best use of the space.
Meltwater, cleaning, outdoor use
An IP54 water-resistant, UV-resistant, impact-resistant polyethylene body that also tolerates temperature extremes. Meltwater and splashing iced water will not harm it, which is a basic requirement with this function. At the end of the event it is worth emptying and wiping out the ice bucket so that no water stands in it until the next occasion. The body can be wiped down with a damp cloth. Since there is no fabric and no join line, sticky syrup and champagne leave no trace either.
How many to plan for
For a welcome drink point, one piece is enough for up to 50–60 arriving guests if the server works with pre-poured glasses. For an arrival of 150, plan for three tables, spread along the entrance stretch so that no queue forms. Three pieces cost three times the price shown above on this page. That is the figure worth comparing with the cost of hired cool boxes and stands over a whole season — especially as this solution is also a piece of illuminated furniture, so it replaces decoration as well.
Typical applications
LED standing table with ice bucket, 70 × 65 × 106 cm (C159) — frequently asked questions
What is the built-in ice bucket good for?
It replaces the separate ice bucket and stand: the ice sits in the body of the furniture and the surface stays free as a set-down area. At a welcome drink point, one piece serves a whole line of arriving guests.
How tall is it?
106 cm, which is standing height. The server does not bend down for the bottle and the guest takes the glass standing up.
Are ice and an electrical system safe together?
It runs on a battery and is IP54-rated, so there is no mains cable near the meltwater, and no cable in the guest area either.
How should I transport it?
Always empty, and fill it on site. Empty it weighs 16.5 kg; with ice and bottles it is considerably heavier. In a vehicle, six pieces fit in one layer on a 1.7 × 3 metre floor.
What needs doing at the end of the event?
Empty the ice bucket and wipe it out so that no water stands in it until the next event. The body can be wiped down with a damp cloth.
Related articles
How a wedding lighting plan is built from reception to dance floor: colour temperature, blue hour, cable-free illuminated furniture and the venue questions.
How to keep illuminated event furniture in service: what to wipe polyethylene with, how to handle the batteries, and what to check after every event.
The daily hire rate is 20% of the gross price, so the balance tips at around five hire days. Three typical cases worked through with concrete figures.
