In short

In a 192×108 cm size, the P1.5 indoor LED video wall gives a native resolution of 1280×720 px, so any Full HD source can be shown on it without distortion. Because of the 1.5 mm pixel pitch the image is already pixel-free from 1.5–2 metres, and a refresh rate above 3840 Hz provides a flicker-free backdrop on video calls and camera recordings. Brightness is 1200 nits, which is more than enough in a bright, glass-walled meeting room. It is the frameless, LCD-replacing solution for conference rooms, meeting rooms and premium retail spaces. The 100,000-hour lifespan of the LED chips means more than 25 years at 10 hours of use a day.

Indoor · 192 × 112 cm

Indoor LED video wall P1.5 – 192×108 cm (HD, 1280×720)

The P1.5 indoor LED video wall is the best choice wherever viewers sit 2–3 metres from the picture: in a meeting room, a conference room, a video conferencing studio or a premium retail space. The 192×108 cm surface has a 16:9 ratio with a native resolution of 1280×720 px, so presentations, spreadsheets and film all appear sharply and without distortion. Unlike LCD video walls, there is no distracting bezel line: the picture is a single continuous surface, scalable to any size by the same logic. The modules are front-serviceable, so maintaining the wall is simple even in a recessed build. At the free site survey we also check whether this pixel pitch really is the best match for the room's lighting and seating layout.

Net price (excl. VAT), installation included
from €3,790
With a 1-year warranty. With a 2-year warranty: €4,040 net.
All prices are net. Reverse charge applies to EU businesses with a valid VAT number.
Beltéri LED fal P1.5 – 192×112 cm (HD, 1280×720)
Choose the warranty:
Add-ons:
Net price (excl. VAT)
€4,080

All prices are net, excluding VAT. Reverse charge applies to EU businesses with a valid VAT number.

The price includes the installation labour. It does not include the call-out (net €0/km, round trip) or any support structure.

Order it / I have a question →
Get a finished quotation — in minutes →

Give us the size, the site and the build, and the system prepares the quotation and emails it straight away. No waiting for a colleague to get to it.

Send me the detailed quote

We will email you a technical proposal tailored to your project: sizing, recommended pixel pitch, power consumption, an itemised price and the installation steps. If you also upload a photo of the site, we will create a free visualisation from it.

Installation site *

We calculate the travel cost from this — required.

This quote is based on
Indoor LED video wall P1.5 – 192×108 cm (HD, 1280×720)
What do you make of the price above?

The quotation comes back at roughly this figure, only itemised and tailored to your size. Tell us where you stand and we will start with what actually matters to you.

Photo of the site — for the free visualisation

A phone photo of the wall or façade where the display would go is enough. Up to 3 photos; your browser resizes them automatically, you do not have to.

No obligation — the quote is free and commits you to nothing.

Technical specifications

Size192 × 108 cm
Pixel pitchP1.5
Native resolution1280 × 720 px
Brightness1200 nit
Ingress protection ratingIP20
Viewing angle160° H / 140° V
Refresh rate≥ 3840 Hz

For meeting rooms and conference rooms – and why not LCD?

The rule of thumb is that 1 mm of pixel pitch corresponds to 2.5–3 metres of comfortable viewing distance, so a P1.5 wall is already pixel-free from 1.5–2 metres and perfectly comfortable to watch from 4 metres. In a meeting room that covers exactly the seats around the table: there is no bad chair, because the 160° horizontal viewing angle keeps the image undistorted from the side too. Unlike LCD video walls there is no bezel and no join line here, and the brightness range is far greater: 1200 nits gives a readable image even in a glass-walled room flooded with midday sun, where a conventional display would already wash out. For anyone who presents to clients every day, this is not a luxury but a working tool.

Technical detail for specialists

A native resolution of 1280×720 px in a 16:9 ratio means a Full HD source appears with close to 1:1 mapping, without interpolation blur. A refresh rate above 3840 Hz is above the lower professional threshold for camera capture, so it is flicker-free as a video conferencing backdrop and in a streaming studio. The signal input is HDMI or DVI, so a laptop, a presentation PC and a video conferencing codec can all be connected directly. The modules are a front maintenance design: they can be replaced from the front without breaking into the wall, which is decisive in a recessed build or where there is little space behind. Brightness can be regulated on a schedule and automatically to suit the room's lighting.

Quality that lasts a decade and more

The typical failing of cheap LED video walls of unknown origin is that the surface goes patchy after six months and there is nobody to ask for parts. Every wall we build uses named, quality LED chips and bin-matched modules, so the colours are uniform across the whole surface – and stay that way. The service backing is entirely our own: parts are available from regional stock, a failed module can be replaced from the front in minutes and the wall does not have to be dismantled. The 100,000-hour chip lifespan means more than 25 years at 10 hours of office use a day, so the wall will most likely outlast the office itself.

Handling and running cost

Day-to-day use is straightforward: once switched on, the wall behaves like a large monitor – it displays your laptop's picture over HDMI immediately, with no separate software. For scheduled content, timing and brightness control there is the controller's interface, which we teach in person at handover: if you can write an email, you can handle this. Average consumption of the 2 m² surface with real content typically stays under 300 W, which at 10 hours of daily operation is well under a euro a day on the electricity bill. If a question arises, phone and online support stand behind you.

Installed in a day

The wall is fixed to the wall on a steel support structure, and the modules clip into place from the front. A meeting room installation, including cabling and commissioning, typically takes 1 day – the room is usable the next day. As an indoor display, it needs no official consent. The quote itemises the price: modules, control, support structure and installation appear on separate lines, so you can see exactly what you are paying for. At the free site survey we also agree the cable route, the electrical connection and the position of the signal source, so that nothing comes as a surprise on installation day.

Typical applications

meeting roomconference roomvideo conferencing studioexhibition standpremium retail spacereception

Indoor LED video wall P1.5 – 192×108 cm (HD, 1280×720) — frequently asked questions

What does a 192×108 cm P1.5 LED video wall cost?

The exact price depends on the control system, the support structure and the conditions of the installation, so we quote after a site survey – and the survey is free. For guidance: P1.5 is the premium segment, with a price per square metre roughly two to three times that of the P2 category, and every item appears on a separate line in the quote.

Is it a good backdrop for video calls and camera recording?

Yes. Because of the refresh rate above 3840 Hz the image neither flickers nor bands through a camera, so it can safely be used as a video conferencing backdrop and in a streaming studio.

How long will it last, and what warranty comes with it?

The lifespan of the LED chips is 100,000 hours, which at 10 hours of use a day is more than 25 years. The exact warranty period is set out in the quote and can be extended with the Warranty+ package on request – spare parts are supplied from regional stock.

Who installs it, and how long does installation take?

Our own installation team fits it: a meeting room wall including the support structure, cabling and commissioning can typically be handed over within 1 day, training included.

What happens if a pixel fails?

A pixel fault is fixed by replacing the module: the affected module can be lifted out and replaced from the front in minutes while the rest of the wall carries on working. We keep bin-matched replacement modules in stock, so the colours stay uniform after the repair.

Can it be extended to a larger size later?

Yes. Thanks to the modular build, the surface can be enlarged afterwards with modules of the same pixel pitch; we then check the capacity of the control system and extend it if necessary.

Related

Why we are the safe choice
  • In-house manufacturing and on-site installation
  • A licensed electrical engineer on every project
  • Warranty + service team in Hungary
  • On the market since 2014 — Kormos Ádám, villamosmérnök-oktató, 30 év tapasztalat
Opten „A” minősítés 2025Bisnode / Dun & Bradstreet „A”Minősített tanúsítvány