P2 is our finest pixel raster, which makes this 112×128 cm panel the best choice when viewers look at the display from very close up, even half a metre away. In a shop window, behind a till or at a reception desk, the text and the graphics stay entirely smooth, with no pixellation. The near-square proportion suits portrait and landscape placement equally. This is the best answer where quality matters rather than the lowest price, and the 100,000-hour service life means a decade upon decade of reliability.
Indoor full-colour LED message sign 112×128 cm (P2)
The 112×128 cm size gives a compact, almost square format that fits easily into smaller shop windows, above counters or along corridors. The P2 pixel pitch delivers 250,000 pixels per square metre, one of the finest rasters available on the market, so even the smallest letters and logo elements stay sharp. 16.7 million colours and high contrast also make photorealistic graphics possible. This panel is for anyone looking for the best close-up image quality.
Send me the detailed quote
We will email you a technical proposal tailored to your project: sizing, recommended pixel pitch, power consumption, an itemised price and the installation steps. If you also upload a photo of the site, we will create a free visualisation from it.
Technical specifications
This model is built to order, so it has no list price — request a quote and we will price it exactly to your dimensions.
Who do we recommend P2 resolution to?
A P2 pixel pitch means that the display points sit only 2 millimetres apart, which produces an extremely dense, sharp image. That matters above all where the audience views the display from arm's length or a few steps away: a pharmacy dispensing counter, a reception, a boutique window or a restaurant entrance. In such places a panel with a coarser raster would look pixelated and amateurish, while P2 gives almost monitor-grade sharpness. The 112×128 cm size is just large enough to show an important message, a logo or an offer graphic in a big yet detailed form, without being oversized for a smaller room.
Use and maintenance
The panel is built from SMD LEDs, which provide an even distribution of light and a wide viewing angle, so the image does not distort or darken when approached from the side. Wi-Fi control and the phone app let you refresh the content remotely, from another room or another site. The timer switches the display off and on automatically at set times, which spares the electricity bill over the long run and makes better use of the 100,000-hour service life. Because of the high refresh rate, above 6,000 Hz, the panel is flicker-free, so it can even be used as a backdrop for a live broadcast or a social media video if the content calls for it.
Quality that is not throwaway import
In the P2 class the quality of the LED chip matters particularly, because a dense pixel raster magnifies every small variation in brightness or colour. That is why we fit only quality, batch-matched SMD LEDs, which we inspect on arrival and again during manufacture, so that the surface of the panel stays perfectly uniform. If a module does fail, it can be released from the front with no tools and swapped in minutes – we supply parts from stock, so there is no waiting weeks for a repair. Our service backing guarantees that the problem is resolved quickly and on site.
Running cost and smart scheduling
The surface of the 112×128 cm panel is 1.43 square metres, and its average consumption with real, mixed content is roughly 180–190 W — the peak figure would only appear on a completely white image at maximum brightness, which nobody uses in practice. At 12 hours of operation a day that comes to about 65–70 kWh a month, a modest electricity cost that is dwarfed by what a continuously refreshed shop-window surface brings in trade. With the timer function the panel follows the opening hours exactly: it goes to sleep by itself after closing and wakes by itself in the morning. In an indoor setting the brightness can also be turned down, which reduces consumption further and extends the 100,000-hour service life.
Typical applications
Indoor full-colour LED message sign 112×128 cm (P2) — frequently asked questions
How does P2 differ from P2.5?
P2 means a denser pixel raster, so it stays sharp at closer viewing distances, while P2.5 is somewhat more economical and optimal for viewing from slightly further away.
Will this size fit in a smaller shop window?
Yes. The 112×128 cm form is compact and almost square, so it fits easily into most average-sized windows or wall surfaces.
Is a specialist needed for the daily content refresh?
No. The phone app is simple enough that any member of the shop's staff can handle the daily text or offer change – if you can write an email, you can handle this too.
What is the warranty, and who repairs it if it fails?
We provide the manufacturer's warranty on the panel and the power supply, and repairs are carried out with our own service backing and spare parts held in stock, so a module swap is typically a matter of minutes rather than weeks.
How much does this panel consume in a month?
With average content, power draw is about 180–190 W, which at 12 hours of operation a day is 65–70 kWh a month — a modest item, and reducible further with the timer.
Who installs the panel?
On request our own installation team fits it: mounting on a wall or in a window typically takes a few hours, and commissioning and training on the controls are part of the handover, at no extra charge.
