The W60 is a dual-connection asynchronous control card supporting both Wi-Fi and LAN modes, with roughly 512×160 pixel capacity, for full-colour LED walls. Its flexible connectivity lets you choose the most reliable network mode at any location — wireless for convenience or wired for stability — without having to guarantee the network conditions in advance. You upload the content from a phone app, and the card then plays it on its own with no computer. We back long-term operational security with a 1-year warranty and spare parts held in stock, on systems integrator and commercial projects alike.
LED wall controller W60
We recommend the W60 card to anyone who wants to keep their options open depending on the installation site: where Wi-Fi coverage is good they can work wirelessly, while at more congested or poorly covered locations they can switch to a wired LAN connection. This duality is especially useful on projects where the network conditions at the final installation point cannot be predicted with certainty. The card works on the asynchronous principle, so the uploaded content is held in its memory and played back continuously from there, independently of the network connection. In the accompanying modules we use quality-controlled, bin-matched LED chips, so the colour of the wall stays uniform for years.
Send me the detailed quote
We will email you a technical proposal tailored to your project: sizing, recommended pixel pitch, power consumption, an itemised price and the installation steps. If you also upload a photo of the site, we will create a free visualisation from it.
Technical specifications
This model is built to order, so it has no list price — request a quote and we will price it exactly to your dimensions.
Flexibility with two connection modes
The W60's greatest advantage is that it does not tie you to a single networking solution: if the Wi-Fi signal is good at the installation site, you can connect simply and without a cable; if the site sits in a congested radio-frequency environment, or a wired network is readily available, you can switch to LAN for maximum stability. That flexibility is particularly valuable on projects where the installation site cannot be surveyed with complete certainty in advance, or where the network conditions may change over time. The card supports full-colour display, so logos, lettering and graphic elements appear in vivid colour on the LED wall. For retail units, event organisers and systems integrators this is the future-proof, prepared-for-anything solution, which we recommend for medium to large walls with a typical viewing distance of 6–15 metres.
Content management in both modes
Whether you choose a Wi-Fi or a LAN connection, content is managed in the same phone app, where you can assemble the text, images, effects and scheduling. After uploading, the card stores the content in internal memory and from then on plays it back on its own and continuously, independently of the type and state of the network connection. That means even if you switch between the two connection modes, the display's operation is not interrupted; an active connection is only needed to upload new content. We give a 1-year warranty on the W60, and we designed it for sustained, continuous operation.
Reliability and service backing for systems integrators
On systems integrator projects the biggest risk is that one faulty element pushes the whole schedule back. The modules that go with the W60 are shipped after quality control with bin-matched LED chips, and in the event of a failure the modular build means the faulty element is accessible from the front and can be swapped in minutes. We supply the part from regional stock with service backing behind it, so a dead pixel just before project completion does not mean weeks of slippage waiting on an import. Alongside the warranty you can also choose a Warranty+ package, giving the end user longer-term security.
Running it: consumption and handing over the controls
The average operating consumption of the medium to large full-colour wall that goes with the W60 typically runs at around 40–70 W/m², higher at peak load. The monthly electricity cost of an 8–10 m² wall is therefore still a well-plannable, transparent item. Daily handling is so simple that if you can write an email on your phone you will quickly learn to use this app, and as part of the handover we run practical training for the end user's staff as well.
Typical applications
LED wall controller W60 — frequently asked questions
Can I use Wi-Fi and LAN at the same time?
The card supports both connection modes, but in practice it is best to set one as the primary mode based on the conditions at the site, for the most stable operation.
What if the network conditions change later?
Because of the W60's flexibility you can simply switch between Wi-Fi and LAN without having to replace the card.
What size of LED wall is it recommended for?
It is ideal for medium and larger full-colour LED walls, where flexible, reliable network connectivity matters.
How long does the module that goes with the card last?
Quality LED chips have a service life of around 80,000–100,000 operating hours, which means well over 10 years even in continuous operation.
As a systems integrator, can I get reseller or project-based parts support?
Yes — we support systems integrator projects with spare parts held in stock and our own service operation, so a fault does not put the schedule back.
Will it stand up to the weather if it is used in an outdoor project?
The control card itself is made for indoor placement; for the outdoor modules connected to it we recommend an appropriate IP rating, which we assess precisely at the site survey.
